Broadcast Television technology Trust Training Workshop

As part of our remit to advance the knowledge of vintage technology, we plan to set up a number of free training workshops. In order to achieve the widest dissemination of information they will be “on-Line”,  These videos will show some of the work being carried out and the processes and techniques used.
Paul one of our volunteers has made a series of videos detailing the restoration and maintenance of the Pye monitors type 842844. The design of these monitors dates from about 1965 and apart from two valves they are solid state.  

Part One test H264 version

Work starts on a 17″ monitor that will be the transmission monitor.  A good clean-up is the start of the process.
Link:-  Circuit diagram

Part Two test ipad version

Grade one CRT monitors had regulated EHT supplies, generated either from the Line Output Stage or, as in this design, a separate EHT generator. One of the main improvements this gave was to keep the picture size the same as the picture brightness changed, a common problem with lessor monitors. This design uses a free running power oscillator into a step-up transformer followed by a voltage doubler circuit.

Part 2 Front

Part Three

A Picture has been achieved , but with an offset to the left, this turned out to be a slight maladjustment of the line hold control. Components were replaced and the tripping of the mechanical circuit breaker investigated.

Link:-  Circuit diagram

part3front

Part Four

Work on the EHT generator continues, EHT generation is always an area of high stress, as well as high voltage. At 50+ years old the components can be problematic!  Also a replacement cooling fan is fitted with a discussion of the voltage required.

Link:-  Circuit diagram

Part 4 front

Part Five

Work continues on this recacitrant monitor. This time we will look at the video amplifer with particular reference to the “Raysistor” used for contrast control.

Link:-  Circuit diagram

Part 5 Front